TM 5-3805-298-23-2
0141
Table 1. Horn Does Not Operate - Continued.
0141
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Horn Does Not Operate -
Test Step 5. Test for Open Horn Fuse.
Continued
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove horn fuse from fuse panel
(TM 5-3805-298-10).
Resistance 5.0 Ohms or Less Install
3. Using digital multimeter
horn fuse (TM 5-3805-298-10).
(WP 0174), measure resistance
Proceed to Test Step 6.
between terminals of horn fuse.
Resistance Greater Than 5.0 Ohms
Replace horn fuse (TM 5-3805-298-10).
Proceed to Test Step 14.
Test Step 6. Test Operation of
Headlights.
1. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
2. Turn the military light switch to Ser.
Drive position and lower switch in
OFF (TM 5-3805-298-10).
3. Observe operation of headlights
Headlights Operate Proceed to Test
(TM 5-3805-298-10).
Step 7.
Headlights Do Not Operate Proceed
to Test Step 11.
Test Step 7. Test Blackout Horn
Relay.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Connect connector LE-C12
(WP 0012, Figure 204) to Horn.
3. Swap blackout horn relay with
blackout headlight relay at fuse
panel (TM 5-3805-298-10).
4. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
5. Press horn button
(TM 5-3805-298-10).
0141-4