TM 5-3805-298-23-2
0140
Table 1. Work Area Vision System (WAVS) Does Not Operate Properly - Continued.
0140
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Work Area Vision System
Test Step 14. Test for Shorted Lower
(WAVS) Does Not Operate
Cab Wiring Harness.
Properly - Continued
1. Disconnect connector RC-C2
(WP 0012, Figure 198) from
connector C-C53 (WP 0012,
Figure 199).
2. Using digital multimeter
Continuity Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C53
Proceed to Test Step 15.
(WP 0012, Figure 199) terminal A
No Continuity Replace camera
and terminal B.
display wiring harness (WP 0269).
Proceed to Test Step 15.
Test Step 15. Verify Malfunction Is
Resolved.
1. Ensure all harness connectors are
connected.
2. Install cooling fan (WP 0234).
3. Install right lower cab access
panels (WP 0347).
4. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
5. Turn the military light switch to Ser.
Drive position and lower switch in
OFF (TM 5-3805-298-10).
6. Observe operation of WAVS
Work Area Vision System (WAVS)
(TM 5-3805-298-10).
Operates Normally Troubleshooting
complete.
Work Area Vision System (WAVS)
Does Not Operate Properly Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0140-9/(10 blank)
