TM 5-3805-298-23-2
0150
Table 1. Bucket Will Not Tilt - Continued.
0150
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Bucket Will Not Tilt -
5. Adjust relief valve pressure for rod
Relief Valve Adjusts to Correct
Continued
end tilt cylinder (WP 0166).
Pressure Proceed to Test Step 7.
Relief Valve Will Not Adjust
Replace combination relief valve
(WP 0373).
Proceed to Test Step 7.
Test Step 7. Verify Malfunction Is
Resolved.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Ensure all hydraulic hoses are
connected.
3. Turn battery disconnect switch to
ON position and start engine
(TM 5-3805-298-10).
4. Warm the transmission oil to
normal operating temperature of
approximately 165F to 185F
(75C to 85C).
5. Bring the hydraulic oil to operating
temperature of 140F (60C)
(TM 5-3805-298-10).
6. Operate bucket tilt dump and
Bucket Tilts Troubleshooting
rollback (TM 5-3805-298-10).
complete.
Bucket Does Not Tilt Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0150-7/(8 blank)
