TM 5-3805-298-23-2
0177
REMOVAL CONTINUED
87. Remove eight bolts (Figure 50, Item 4), four clamps (Figure 50, Item 5) and driveshaft (Figure 50, Item 3) from
machine.
CAUTION
Cap all hydraulic openings along with component connections during removal to protect
against contamination. Failure to follow this caution may result in damage to equipment.
NOTE
Tag and mark all hoses and tubes to aid in installation.
Note routing of hoses and tubes for installation.
88. Loosen tube nut (Figure 50, Item 2) and remove O-ring (Figure 50, Item 6) from hose (Figure 50, Item 1).
Position hose aside.
Figure 50. Driveshaft.
0177
