TM 5-3805-298-23-2
0177
INSTALLATION CONTINUED
64. Install quick coupler solenoid valve (Figure 92, Item 1), two washers (Figure 92, Item 2) and bolts (Figure 92,
Item 3) on machine.
65. Connect quick coupler solenoid connector (Figure 92, Item 14) to front frame wiring harness connector
(Figure 92, Item 13).
CAUTION
Remove all caps from hydraulic openings and component connections during installation.
Failure to follow this caution may result in damage to equipment.
NOTE
Install hoses and tubes as noted during removal.
66. Install new O-ring (Figure 92, Item 11), hose (Figure 92, Item 7) and tighten tube nut (Figure 92, Item 10) on
quick coupler solenoid valve (Figure 92, Item 1).
67. Install new O-ring (Figure 92, Item 12), hose (Figure 92, Item 8) and tighten tube nut (Figure 92, Item 9) on
quick coupler solenoid valve (Figure 92, Item 1).
68. Install new O-ring (Figure 92, Item 6), hose (Figure 92, Item 4) and tighten tube nut (Figure 92, Item 5) on quick
coupler solenoid valve (Figure 92, Item 1).
.
Figure 92. Quick Coupler Solenoid Valve.
0177