TM 5-3805-298-23-2
0201
HIGH-PRESSURE FUEL INJECTOR TUBES INSTALLATION
000201
NOTE
Refer to removal for fuel injector tube position.
1. Install clip (Figure 7, Item 4) on new fuel injector tubes (Figure 7, Item 3).
CAUTION
Remove all caps from all fuel line openings along with component connections. Failure to
follow this caution may result in damage to equipment.
NOTE
Refer to removal for fuel injector tube routing.
2. Install fuel injector tubes (Figure 7, Item 3) on machine.
3. Tighten three tube nuts (Figure 7, Item 6) on fuel rail (Figure 7, Item 5) to 22 lb-ft (30 Nm).
4. Tighten three tube nuts (Figure 7, Item 2) on valve cover (Figure 7, Item 1) to 22 lb-ft (30 Nm).
0201-9
