TM 5-3805-298-23-2
0201
HIGH-PRESSURE FUEL INJECTOR TUBES REMOVAL CONTINUED
5. Loosen three tube nuts (Figure 7, Item 2) from valve cover (Figure 7, Item 1).
6. Loosen three tube nuts (Figure 7, Item 6) from fuel rail (Figure 7, Item 5).
NOTE
Note routing of fuel injector tubes for installation purposes.
7. Remove three fuel injector tubes (Figure 7, Item 3) from machine.
NOTE
Note position of fuel injector tubes for installation purposes.
8. Remove clip (Figure 7, Item 4) from fuel injector tubes (Figure 7, Item 3). Discard fuel injector tubes.
Figure 7. Fuel Injector Tubes.
0201
END OF TASK
CLEANING AND INSPECTION
000201
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK