TM 5-3805-298-23-2
0209
WASTEGATE SOLENOID REMOVAL
000209
CAUTION
Cap or plug all hose ends and fittings during removal to protect against contamination.
Failure to follow this caution may result in damage to equipment.
NOTE
Tag and mark wiring harness and wastegate solenoid wiring harness connector to aid
installation.
Note position of tiedown straps and clips to aid installation.
1. Remove tiedown strap (Figure 1, Item 2) from wastegate solenoid wiring harness connector (Figure 1, Item 3).
Discard tiedown strap.
2. Disconnect wastegate solenoid wiring harness connector (Figure 1, Item 3) from engine control wiring harness
(Figure 1, Item 1).
Figure 1. Wastegate Solenoid Wiring Harness Connector.
0209