TM 5-3805-298-23-2
0220
CLEANING AND INSPECTION
000220
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
2. If filter element is damaged or has reached or exceeded its mandatory replacement interval (WP 0169),
replace filter element.
END OF TASK
INSTALLATION
000220
CAUTION
Do not fill filter element with fuel before installing on secondary fuel filter base. Fuel will not
be filtered and may contain contaminates. Contaminated fuel will result in accelerated
wear to fuel system parts and early failure of fuel system.
1. Turn filter element (Figure 1, Item 1) clockwise to install on secondary fuel filter base
(Figure 1, Item 2).
2. Tighten filter element (Figure 1, Item 1) until seal contacts base, then tighten an additional 3/4 turn to one full
turn, and remove drain pan.
END OF TASK
FOLLOW-ON TASKS
000220
1. Prime fuel system (TM 5-3805-298-10).
2. Verify correct operation of machine (TM 5-3805-298-10).
END OF TASK
END OF WORK PACKAGE
0220-3/(4 blank)