TM 5-3805-298-23-2
0221
INSTALLATION CONTINUED
2. If removed install new O-ring (Figure 4, Item 13) and fitting (Figure 4, Item 12) on secondary fuel filter base
(Figure 4, Item 1).
3. Install secondary fuel filter base (Figure 4, Item 1) and two bolts (Figure 4, Item 3) on bracket
(Figure 4, Item 2).
NOTE
Remove caps or plugs from hoses, tube, and open ports.
Route hoses and tube as noted during removal.
Use container to catch any fluid that may drain from system. Dispose of fluid IAW local
policy and ordinances. Ensure all spills are cleaned up.
4. Install hose (Figure 4, Item 4) on secondary fuel filter base (Figure 4, Item 1).
5. Rotate tube (Figure 4, Item 9) up to secondary fuel filter base (Figure 4, Item 1) and tighten nut
(Figure 4, Item 8).
6. Tighten tube nut (Figure 4, Item 10) on elbow fitting (Figure 4, Item 11).
7. Install new O-ring (Figure 4, Item 5), hose (Figure 4, Item 7), and tube nut (Figure 4, Item 6) on secondary fuel
filter base (Figure 4, Item 1).
8. If removed, install secondary fuel filter (WP 0220).
Figure 4. Secondary Fuel Filter Base.
0221
END OF TASK
