TM 5-3805-298-23-2
0230
COOLANT TANK OVERFLOW HOSE INSTALLATION CONTINUED
NOTE
Remove plugs or caps from hose.
Route hose and install clips as noted during removal.
1. Position overflow hose (Figure 18, Item 3) on machine.
2. Install P-clamp (Figure 18, Item 11) on overflow hose (Figure 18, Item 3).
3. Install P-clamp (Figure 18, Items 10 and 11), washer (Figure 18, Item 8), and bolt (Figure 18, Item 9) on panel
(Figure 18, Item 4).
4. Install P-clamp (Figure 18, Item 2) on overflow hose (Figure 18, Item 3).
5. Install spacer (Figure 18, Item 1), two P-clamps (Figure 18, Items 2 and 7), washer (Figure 18, Item 6) and bolt
(Figure 18, Item 5) on panel (Figure 18, Item 4).
Figure 18. Overflow Hose Clips and Spacer.
0230
