TM 5-3805-298-23-2
0232
REMOVAL
000232
WARNING
DO NOT service cooling system unless engine has cooled. This is a pressurized cooling
system and escaping steam or hot coolant will cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool
down. Loosen cap to first stop and let any pressure out of cooling system, then remove
cap.
Wear effective eye, glove, and skin protection when handling coolants.
Failure to follow these warnings may cause injury or serious burns to personnel.
1. Loosen clamp (Figure 1, Item 3) and remove hose (Figure 1, Item 4) from water temperature regulator
(Figure 1, Item 1).
NOTE
Note location and length of bolts and orientation of water temperature regulator on engine
to aid installation
2. Remove two bolts (Figure 1, Items 2 and 7), water temperature regulator (Figure 1, Item 1), and gasket
(Figure 1, Item 6) from engine (Figure 1, Item 5). Discard gasket.
Figure 1. Water Temperature Regulator.
0232
