TM 5-3805-298-23-4
0359
REAR WIPER ARM REMOVAL CONTINUED
CAUTION
Use care when loosening bolts. Nuts in wiper arm are not captive. If bolts are loosened too
much, nuts may fall into hull or be lost.
NOTE
Mark location of wiper arm on shaft to aid installation.
2. Loosen two bolts (Figure 3, Item 2) and clamp (Figure 3, Item 3) from rear wiper motor shaft (Figure 3, Item 4).
3. Remove rear wiper arm (Figure 3, Item 1) from rear wiper motor shaft (Figure 3, Item 4).
Figure 3. Rear Wiper Arm.
0359
END OF TASK
