TM 5-3805-298-23-4
0410
REMOVAL CONTINUED
NOTE
Tag and mark wiring harness connectors and note wiring harness routing to aid
installation.
Note position and quantity of tiedown straps to aid installation.
17. Remove tiedown straps (Figure 8, Item 2) from cab heater wiring harness (Figure 8, Item 1). Discard tiedown
straps.
18. Disconnect cab heater wiring harness connector (Figure 8, Item 8) from blower motor connector
(Figure 8, Item 7).
19. Disconnect two cab heater wiring harness terminals (Figure 8, Item 5) from A/C temperature switch
(Figure 8, Item 6).
20. Disconnect three cab heater wiring harness terminals (Figure 8, Item 3) from blower motor resistor
(Figure 8, Item 4).
21. Remove cab heater wiring harness (Figure 8, Item 1) from machine.
Figure 8. Cab Heater Wiring Harness.
0410
END OF TASK
CLEANING AND INSPECTION
000410
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
