TM 5-3805-298-23-4
0421
REMOVAL CONTINUED
WARNING
Wear effective eye, glove, and skin protection when handling coolants.
Failure to follow these warnings may cause injury or serious burns to personnel.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection,
maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid
with suitable containers before opening any compartment or disassembling any
component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Note hose routing to aid installation.
17. Cut foam seal (Figure 10, Item 2) where heater coil (Figure 10, Item 3) and evaporator (Figure 10, Item 1)
meet. If foam seal is damaged, discard.
18. Remove bolt (Figure 10, Item 5) and washer (Figure 10, Item 4) securing heater coil (Figure 10, Item 3) to
evaporator (Figure 10, Item 1).
Figure 10. Heater Coil Bolt Right Side.
0421
