TM 5-3805-298-23-4
0421
REMOVAL CONTINUED
NOTE
It is not necessary to remove hose unless it is damaged or leaking.
If removed, note hose routing and location to aid installation.
23. Remove two clamps (Figure 14, Item 2) and hose (Figure 14, Item 3) from heater control valve elbow
(Figure 14, Item 1) and fitting (Figure 14, Item 4).
Figure 14. Heater Coil Hose.
0421
END OF TASK
CLEANING AND INSPECTION
000421
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
INSTALLATION
000421
NOTE
If removed, install hoses as noted during removal.
1. Install hose (Figure 14, Item 3) and two clamps (Figure 14, Item 2) on fitting (Figure 14, Item 4) and heater
control valve elbow (Figure 14, Item 1).
