TM 55-607/NAVSEA OP 3221 Rev 2
OP 3221 Rev 2 along the hull as shown in figure 9-4 to
(2) Prestow requirements for the stowage of
protect against protrusion, for instance, padeyes or
105-mm ammunition unit loads in a rectangular hold or
sweatboard hangers. Heat or nonheat bulkheads or
compartment are minimal. Partial 1-inch minimum strip
encasement structures are constructed as required.
sheathing or boarding is installed TM 55-607/NAVSEA
Figure 9-4. Strip sheathing and bulkhead requirements for 105-mm unit loads (sweatboard blocking technique).
9-7
