DISASSEMBLY AND ASSEMBLY
8. Fasten strap (9) and a hoist as shown for sup-
port of the fan drive. Loosen bolts (10) and the
nuts so there is enough clearance to remove the
water pump bolts.
9. Loosen two bolts (12) so water pump (11) and
O-ring seal can be removed from the front
INSTALL WATER PUMP
1. Make sure O-ring seal is in position on water
2. Install water pump (1) on the front cover as
3. Tighten bolts (2) and the nuts that hold the fan
drive to the engine.