TM 5-2420-231-10
0022
PMCS - Continued
Table 1. PMCS.
ITEM TO BE
EQUIPMENT NOT
ITEM
CHECKED OR
READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
1
Before
Backhoe Loader
1. Check underneath the BHL for
Any fuel leaks or
(BHL) exterior
signs of fluid leaks (fuel, oil,
Class III leakage of
transmission, hydraulic fluid, or
oil, transmission fluid,
coolant.
hydraulic fluid, or
coolant.
2. Check for missing or loose bolts
or nuts.
3. Check exterior for cracks or
damage.
2
Before
Left rear tire and
1. Check tire for uneven or ex-
Tire has excessive
wheel
cessive wear, large cuts, other
damage or wear, low
damage, or low pressure (below
pressure, or does not
38 psi (262 kPa)).
hold air.
2. Check wheel for damage.
Wheel damaged.
3. Check for loose or missing lug
Any loose or missing
nuts.
lug nuts
3
Before
Right rear tire and
1. Check tire for uneven or ex-
Tire has excessive
wheel
cessive wear, large cuts, other
damage or wear, low
damage, or low pressure (below
pressure, or does not
38 psi (262 kPa)).
hold air.
2. Check wheel for damage.
Wheel damaged.
3. Check for loose or missing lug
Any loose or missing
nuts.
lug nuts.
4
Before
Hydraulic tank
1. Check for hydraulic fluid between
Hydraulic fluid level
ADD and FULL marks on sight
low.
gage and add hydraulic fluid as
required (WP 0023).
2. Check for leaks.
Class III leaks.
5
Before
Right front tire and
1. Check tire for uneven or ex-
Tire has excessive
wheel
cessive wear, large cuts, other
damage or wear, low
damage, or low pressure (below
pressure, or does not
50 psi (345 kPa)).
hold air.
2. Check wheel for damage.
Wheel damaged.
3. Check steering cylinder for
Steering cylinder
damage.
damaged.
4. Check for loose or missing lug
Any loose or missing
nuts.
lug nuts.
