TM 5-2420-231-10
0022
PMCS - Continued
Table 1. PMCS - Continued.
ITEM TO BE
EQUIPMENT NOT
ITEM
CHECKED OR
READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
13
Before
Lights, gages,
1. Perform all light checks in
Any lights necessary
warning indicators,
accordance with WP 0009.
for operation not
and audible alarms
operating properly.
2. Start engine and monitor all
a. Any gages un-
gages, warning indicators, horn,
readable or not
and audible alarms for proper
functioning
operation (WP 0004 thru
properly.
b. Any warning in-
dicators or
audible alarms
not operating
properly.
14
Before
Heat and air
Check for operation as required
Heat or air
conditioning
conditioning not
operating properly.
WARNING
Before operating the BHL, make sure
service and parking brakes are
operable (WP 0010). Failure to
comply may result in serious injury or
death to personnel.
15
Before
Service brakes/
1. Check service brakes (WP 0010).
Brake pedals soft or
parking brake
travel to floor.
2. Check parking brake (WP 0010)
Parking brake cannot
and adjust if necessary (WP
be adjusted to hold
the BHL.
16
Before
Reverse alarm
Check reverse alarm operation
Alarm does not
operate properly.
17
During
Accelerator and hand
Check for proper operation.
Accelerator or hand
throttle
throttle cannot be
easily controlled.
18
During
Engine
Listen for any unusual engine noises
Any unusual engine
or vibrations during normal operation.
noises or vibrations.
19
During
Transmission
When engine has warmed up to
Transmission erratic
normal operating temperature and
or slips in any
with brakes applied, shift direction
position.
control level through all positions and
check that transmission is smooth
and does not slip.
0022-4
