TM 5-2420-231-10
0022
PMCS - Continued
Table 1. PMCS - Continued.
ITEM TO BE
EQUIPMENT NOT
ITEM
CHECKED OR
READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
32
After
Backhoe bucket
1. Check for damage, loose or
Any defect that would
missing parts, and secure
prevent operation.
mounting.
NOTE
Use scale on inside back cover of this
manual as a guide when checking
backhoe bucket teeth measurement.
2. Check teeth and cutting edges. If
Any backhoe bucket
tooth measurement from back to
teeth less than 3.5
front tip is 3.5 inches (8.9 cm) or
inches (8.9 cm) long.
less, notify field level maintenance
to replace teeth.
33
After
Right side of backhoe
1. Check for damage, loose or
Any defect that would
boom, dipper, and
missing parts, and secure
prevent operation.
hoses
mounting.
2. Check hoses for chafing and
Class III leaks.
leaks.
34
After
Right side of backhoe
1. Check for damage, loose or
Any defect that would
swing post
missing parts, and secure
prevent operation.
mounting.
2. Check hoses for chafing and
Class III leaks.
leaks.
35
After
Right stabilizer
Check for damage and loose or
Any defect that would
missing parts.
prevent operation.
36
After
Rear lights/
1. Check for damage, loose or
Any lights necessary
windshield wiper
missing parts, and secure
for night operation
mounting.
damaged or missing.
2. Check wiper blade for cracks or
Blade damaged.
tears.
0022-8