TM 5-2420-231-10
0023
SERVICING PROCEDURES - Continued
NOTE
Transmission fluid level must be between LOW and HIGH marks on dipstick.
One quart of transmission fluid will move level from LOW to HIGH mark.
6. If transmission fluid level is at LOW mark or below, shut engine off and add fluid as required until fluid
level is at HIGH mark.
7. Start engine and recheck transmission fluid level.
8. Shut engine off.
9. Clean up spills with cleaning compound and wiping rag. Dispose of used rags per unit SOP.
10. Close engine hood.
Coolant Fluid Level Check
WARNING
Make sure engine is shut off before raising engine hood. Hot metal surfaces will burn flesh
on contact. Exercise care when raising hood and servicing engine. Failure to comply may
result in serious injury or death to personnel.
Keep clear of rotating fan and belts. Failure to comply may result in serious injury or death to
personnel.
NOTE
Check coolant level when coolant is cold and with engine shut off.
Coolant fluid level must be between ADD and FULL marks on reservoir.
1. Park the BHL on level ground.
2. Engage parking brake and shift direction control lever to neutral position.
3. Shut engine off.
0023-12
