TM 5-2420-231-10
0023
SERVICING PROCEDURES - Continued
7. Hydraulic reservoir is full when hydraulic fluid covers half of sight gage window (Figure 5, Item 2) (at
FULL mark).
8. Hydraulic reservoir requires servicing when fluid level in sight gage window is at ADD level or below.
WARNING
Hydraulic fluid may be absorbed through the skin. Wear long sleeves, gloves, and goggles
or face shield when handling hydraulic fluid. If hydraulic fluid gets into the eyes, flush eyes
immediately with water and seek medical attention. If hydraulic fluid gets on the skin, wash
thoroughly with soap and water. Wash hands thoroughly prior to eating or smoking. Failure
to comply may result in serious injury to personnel.
9. Press, twist CCW, and remove cap (Figure 5, Item 1) from hydraulic tank and add hydraulic fluid as
required (WP 0029, Item 16).
10. Press and twist cap (Figure 5, Item 1) CW onto hydraulic tank.
11. Clean up spills with wiping rag. Dispose of used rags per unit SOP.
Figure 5. Hydraulic Tank.
