TM 5-2420-231-10
0023
SERVICING PROCEDURES - Continued
4. Raise engine hood.
5. If coolant fluid level is at COLD MIN mark or below, add fluid as required until fluid level is at HOT MAX
mark.
6. Remove cap (Figure 7, Item 1) from coolant reservoir and add antifreeze mixture of 50% antifreeze and
50% water.
7. Install cap (Figure 7, Item 1) onto coolant reservoir.
8. Clean up spills with wiping rag. Dispose of used rags per unit SOP.
9. Close engine hood.
Figure 7. Coolant Reservoir.