TM 5-2420-231-23-1
0008
Table 1. Batteries Do Not Maintain Charge - Continued.
08
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
10. Using digital multimeter, test for
Continuity - Proceed to step 11.
Batteries Do Not Maintain
continuity between negative termi-
No Continuity - Replace NATO slave
Charge - Continued
nal (Figure 6, Item 3) and outer
receptacle (WP 0197).
ring (Figure 6, Item 4) of NATO
Proceed to Test Step 6.
slave receptacle. There should be
continuity.
11. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between negative termi-
Replace NATO slave receptacle (WP
nal (Figure 6, Item 3) and inner
0197).
ring (Figure 6, Item 5) of NATO
Proceed to Test Step 6.
slave receptacle. Resistance
Resistance Greater Than 5.0 Ohms -
should be 5.0 ohms or less.
Proceed to step 12.
12. Using digital multimeter, measure
Resistance 5.0 Ohms or Less -
resistance between negative ter-
Proceed to Test Step 5.
minal (Figure 6, Item 3) and
Resistance Greater Than 5.0 Ohms -
machine negative terminal (Figure
Replace negative cable (WP 0198).
6, Item 1). Resistance should be
Proceed to Test Step 6.
5.0 ohms or less.
Figure 6. NATO Slave Receptacle Terminals.
0008