TM 5-2420-231-23-1
0011
Table 1. Hard Start in Cold Temperatures (50F or Below) - Continued.
011
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
15. Turn ignition switch to the off posi-
Hard Start in Cold
tion (TM 5-2420-231-10).
Temperatures (50F or
Below) - Continued
16. Disconnect grid heater wiring har-
ness connector (Figure 17, Item 1)
from main chassis wiring harness
connector (Figure 17, Item 2).
Figure 17. Cold Start Wiring Harness Connector.
0011
17. Turn ignition switch to the crank
position (TM 5-2420-231-10) while
performing the next step.
18. Using a digital multimeter, mea-
sure voltage between main chas-
sis wiring harness connector (WP
0007, Figure 16) terminal 3 and
machine ground. Voltage should
be 10 to 14 volts.