TM 5-2420-231-23-1
0022
Table 1. Transmission Temperature Gauge Indicates High Temperature,
Does Not Function, or Is Inaccurate - Continued.
022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Transmission Temperature
6. Using a digital multimeter, mea-
Resistance 10 Ohms or Less -
Gauge Indicates High
sure resistance between rear main
Replace instrument cluster (WP 0177).
Temperature, Does Not
chassis wiring harness connector
Proceed to Test Step 7.
Function, or Is Inaccurate -
(WP 0007, Figure 25) terminal 1B
Connect side console wiring harness
Continued
and machine ground. Resistance
(WP 0007, Figure 24) to rear main
should be 10 ohms or less.
chassis wiring harness (WP 0007,
Figure 25) and install front instrument
panel right-side cover (WP 0176).
Resistance Greater Than 10 Ohms -
Replace main chassis wiring harness
(WP 0154).
Proceed to Test Step 7.
Test Step 6. Test Transmission
Temperature Sender and Signal
Circuit for a Short to Ground.
1. Turn ignition switch to the off posi-
tion (TM 5-2420-231-10) and dis-
connect batteries (WP 0157).
2. Remove locknut (Figure 12,
Item 1) and wiring harness con-
nector (Figure 12, Item 3) from
transmission temperature sender
(Figure 12, Item 2).
0022-14
