TM 5-2420-231-23-1
0023
Table 1. Fuel Level Gauge Does Not Function or Is Inaccurate - Continued.
023
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8. Turn ignition switch to the off posi-
Fuel Level Gauge Does Not
tion (TM 5-2420-231-10) and dis-
Function or Is Inaccurate -
connect batteries (WP 0157).
Continued
9. Remove two screws (Figure 8,
Item 2) from instrument panel clus-
ter (Figure 8, Item 1), pull instru-
ment panel cluster (Figure 8,
Item 1) from bezel (Figure 8,
Item 3), and disconnect side con-
sole wiring harness connector
(Figure 8, Item 4) (WP 0007, Fig-
ure 28) from instrument panel clus-
ter (Figure 8, Item 1) (WP 0007,
Figure 29) (WP 0177).
Figure 8. Instrument Cluster.
0023
10. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Less -
sure resistance between side con-
Replace instrument cluster (WP 0177).
sole wiring harness connector (WP
Proceed to step 17.
0007, Figure 28) terminal 20 and
Resistance Greater Than 5.0 Ohms -
machine ground. Resistance
Proceed to step 11.
should be 5.0 ohms or less.