TM 5-2420-231-23-1
0035
Table 1. All Lights and Alarm Signal Do Not Function - Continued.
035
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
All Lights and Alarm Signal 2. Using a digital multimeter, mea-
Resistance 80 to 100 Ohms - Proceed
sure resistance between drive
to step 3.
Do Not Function - Continued
lights relay (WP 0007, Figure 69)
Resistance Less Than 80 Ohms -
terminals 85 and 86. Resistance
Replace drive lights relay (WP 0007,
should be 80 to 100 ohms.
Figure 69).
Proceed to Test Step 11.
3. Using a digital multimeter, mea-
Resistance 80 to 100 Ohms - Proceed
sure resistance between alarm
to Test Step 8.
relay (WP 0007, Figure 76) termi-
Resistance Less Than 80 Ohms -
nals 85 and 86. Resistance should
Replace alarm relay (WP 0007, Figure
be 80 to 100 ohms.
76).
Proceed to Test Step 11.
0035-7
