TM 5-2420-231-23-1
0035
Table 1. All Lights and Alarm Signal Do Not Function - Continued.
035
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
All Lights and Alarm Signal Test Step 2. Check for Faulty Signal
Do Not Function - Continued Lights Fuse.
1. Turn ignition switch to the off posi-
tion (TM 5-2420-231-10) and dis-
connect batteries (WP 0157).
2. Remove signal lights fuse (TM 5-
2420-231-10).
3. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Less -
sure resistance between terminals
Proceed to Test Step 3.
of signal lights fuse. Resistance
Resistance Greater Than 5.0 Ohms -
should be 5.0 ohms or less.
Replace signal lights fuse (TM 5-2420-
231-10).
Proceed to Test Step 4.
Test Step 3. Check for Faulty Light
Control Switch.
1. Disconnect front console wiring
harness connector (WP 0007, Fig-
ure 71) from light control switch
(WP 0007, Figure 72) (WP 0175).
0035-3
