TM 5-2420-231-23-1
0035
Table 1. All Lights and Alarm Signal Do Not Function - Continued.
035
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
All Lights and Alarm Signal 2. Remove screw (Figure 2, Item 4)
and lever (Figure 2, Item 3) from
Do Not Function - Continued
light control switch (Figure 2,
Item 5).
3. Remove four screws (Figure 2,
Item 1), washers (Figure 2,
Item 2), and light control switch
(Figure 2, Item 5) from bracket
(Figure 2, Item 6).
4. Install lever (Figure 2, Item 3) and
screw (Figure 2, Item 4) on light
control switch (Figure 2, Item 5).
5. Place light control switch in SER.
DRIVE position (TM 5-2420-231-
10).
Figure 2. Light Control Switch.
0035
