TM 5-2420-231-23-1
0038
Table 1. Rear Work Lights Do Not Function Correctly - Continued.
038
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Pull bezel (Figure 3, Item 2) away
Rear Work Lights Do Not
from side console (Figure 3,
Function Correctly -
Item 1).
Continued
3. Disconnect side console wiring
harness connector (Figure 3,
Item 4) (WP 0007, Figure 88) from
rear work lamp switch (Figure 3,
Item 3) (WP 0007, Figure 89).
4. Disconnect side console wiring
harness connector (WP 0007, Fig-
ure 88) from rear work lamp switch
(WP 0007, Figure 89).
5. Using a digital multimeter, test for
Continuity - Proceed to Test Step 21.
continuity between front console
No Continuity - Proceed to Test Step
fuse block connector (WP 0007,
18.
Figure 70) terminal 7D and
machine ground. There should be
no continuity.
Figure 3. Rear Work Lights Switch and Bezel.
0038
Test Step 18. Check Rear Work
Lights for a Short.
1. Disconnect far-right rear work light
(WP 0007, Figure 85) from rear
lights wiring harness connector
(WP 0007, Figure 84).
2. Disconnect center-right rear work
light (WP 0007, Figure 85) from
rear lights wiring harness connec-
tor (WP 0007, Figure 84).