TM 5-2420-231-23-2
0088
LUBRICATION INSTRUCTIONS CONTINUED
NOTES
00088
1. New BHL
Replace engine oil and filter after first 50 hours of operation. Refer to WP 0126.
2. Engine Coolant
Refer to TM 5-2420-231-10 for coolant fill procedures, including important warnings for working on a pressur-
ized cooling system.
3. Engine Oil and Filter
(C) Check oil level daily. Maintain level between marks on level gauge (dipstick). Add oil (OE/HDO) as
required. Refer to TM 5-2420-231-10.
(F) Refer to WP 0126 for engine oil and filter service procedures.
4. Hydraulic System
(C) Check hydraulic oil level in sight glass daily. Maintain oil level between marks on sight glass. Refer to TM 5-
2420-231-10.
(F) Refer to WP 0301 for hydraulic oil and filter service procedures.
5. Transmission Service
(C) Check transmission oil level daily. Maintain level between marks on level gauge (dipstick). Add transmis-
sion oil as required (TM 5-2420-231-10).
(F) Refer to WP 0216 for transmission oil service procedures.
6. Front Axle and Wheel Ends Service
Refer to WP 0205 for front axle and wheel end oil drain and refill procedures.
7. Rear Axle and Wheel Ends Service
Refer to WP 0220 for rear axle and wheel end oil drain and refill procedures.
END OF TASK
END OF WORK PACKAGE
0088-16
