6
TM 5-2420-231-23-2
FIELD MAINTENANCE
-
ENGINE OIL AND FILTER SERVICE
01
26
Drain Engine Oil, Oil Filter Removal, Cleaning and Inspection, Oil Filter Installation, Fill Engine Oil
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
Tool Kit, General Mechanic's
O-ring
0
0
(WP 0376, Item 117)
References
Hex Wrench, Metric 12 mm (WP 0376, Item 41)
0
WP 0369
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
0
0
WP 0374 (Group Number 0110 and 0127)
Wrench, Combination, Standard Length, 12 Pt,
0
0
1-1/16" (WP 0376, Item 127)
Equipment Conditions
Wrench, Oil Filter (WP 0376, Item 141)
Front end loader raised with safety support
0
0
strut engaged (TM 5-2420-231-10)
Materials/Parts
Hood raised (TM 5-2420-231-10)
Cleaning Compound, Solvent, Type III
0
0
(WP 0375, Item 7)
Estimated Time to Complete
Oil, Engine, 15W40 (WP 0375, Item 22)
0.3 hr
0
0
Rag, Wiping (WP 0375, Item 25)
0
WARNING
Engine oil should be warm to ensure it drains completely from crankcase. Use caution to
protect against burns when draining oil.
Contact with engine oil can damage skin. Wear gloves when handling engine oil. If oil
contacts skin, wash it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
When servicing this machine, performing maintenance, or disposing of materials such as
engine coolant, hydraulic fluid, lubricants, battery acids or batteries, and CARC paint,
consult your unit/local hazardous waste disposal center or safety office for local regulatory
guidance. If further information is needed, please contact The Army Environmental Hotline
at 1-800-327-3845.
Failure to follow these warnings may result in injury to personnel.
0126-1
