6
TM 5-2420-231-23-2
FIELD MAINTENANCE
-
FRONT AXLE ASSEMBLY DRAIN AND REFILL
0
205
Level Check, Drain, Cleaning and Inspection, Fill
INITIAL SETUP
References
Tools and Special Tools
Tool Kit, General Mechanic's
0
0
(WP 0376, Item 117)
WP 0369
0
Measure, Liquid, 2 qt (WP 0376, Item 52)
WP 0374 (Group Number 0501)
0
0
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
0
Equipment Conditions
Materials/Parts
Machine parked (TM 5-2420-231-10)
0
Case AKCELA MS-1209, Hy-tran Ultra
0
Estimated Time to Complete
(WP 0375, Item 5)
0.7 hr
Rag, Wiping (WP 0375, Item 25)
0
0
Tape, Antiseizing Teflon (WP 0375, Item 34)
0
O-ring (4)
0
LEVEL CHECK
0205
NOTE
Machine must be parked on a level surface to perform this check.
1. Remove fill plug (Figure 1, Item 1) from front axle center bowl (Figure 1, Item 2). Fluid level should be at the
bottom of the fill hole. Add fluid as necessary.
2. Wrap fill plug (Figure 1, Item 1) with teflon tape and install on front axle center bowl (Figure 1, Item 2).
Figure 1. Front Axle Center Bowl.
0205