TM 5-2420-231-23-2
0091
REMOVAL CONTINUED
NOTE
Tag and mark wires to aid in installation.
Note routing of wires to aid in installation.
24. Remove two bolts (Figure 8, Item 3) and lockwashers (Figure 8, Item 4) from accelerator cable bracket
(Figure 8, Item 5). Discard lockwashers.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark hoses to aid in installation.
25. Loosen clamp (Figure 8, Item 2) and disconnect coolant hose (Figure 8, Item 1) from engine.
Figure 8. Throttle Cable.
0091
NOTE
Tag and mark wires to aid in installation.
26. Disconnect connector (Figure 9, Item 5) from grid heater (Figure 9, Item 1).
27. Remove nut (Figure 9, Item 2) and cable (Figure 9, Item 3) from grid heater (Figure 9, Item 1).