TM 5-2420-231-23-2
0142
REMOVAL
0142
1. Remove two bolts (Figure 1, Item 4), lockwashers (Figure 1 Item 5), and accelerator bracket (Figure 1 Item 6)
from high-pressure fuel pump (Figure 1, Item 3). Discard lockwashers.
2. Disconnect vacuum line (Figure 1, Item 1) and remove seal (Figure 1, Item 2) from high-pressure fuel pump
(Figure 1, Item 3). Discard seal.
Figure 1. High-Pressure Fuel Pump.
0142
3. Remove two bolts (Figure 2, Item 1) and washers (Figure 2, Item 2) from accelerator cable bracket (Figure 2,
Item 3). Position accelerator cable aside.
Figure 2. Accelerator Cable Bracket.
0142