TM 5-2420-231-23-2
0183
CLEANING AND INSPECTION
0183
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0183
1. Route wiring harness connector (Figure 8, Item 2) through access hole (Figure 8, Item 3), and install wiring
harness on machine.
Figure 8. Wiring Harness Connector.
0183
2. Install shield (Figure 9, Item 9), washer (Figure 9, Item 2), and bolt (Figure 9, Item 1) on machine.
3. Install bolt (Figure 9, Item 3), washer (Figure 9, Item 4), bracket (Figure 9, Item 5), spacer (Figure 9, Item 6),
new lockwasher (Figure 9, Item 7), and nut (Figure 9, Item 8), from shield (Figure 9, Item 9).
Figure 9. Shield.
0183
