TM 5-2420-231-23-2
0186
CLEANING AND INSPECTION
0186
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0186
NOTE
Install wires as tagged and marked during removal.
Remove plugs and caps from hoses and fittings.
1. Install backup alarm (Figure 2, Item 4), two washers (Figure 2, Item 3), and bolts (Figure 2, Item 2) on
machine.
2. Connect electrical connector (Figure 2, Item 1).
3. Install swing cushion valve (Figure 3, Item 5), two bolts (Figure 3, Item 2), washers (Figure 3, Item 3), and nuts
(Figure 3, Item 4) on machine.
4. Connect two tubes (Figure 3, Item 1) on swing cushion valve (Figure 3, Item 5).
Figure 3. Swing Cushion Valve.
0186
END OF TASK
FOLLOW-ON TASKS
0186
1. Install right-rear floor cover plate (WP 0306).
2. Connect batteries (WP 0157).
END OF TASK
END OF WORK PACKAGE
0186-3/(4 blank)
