TM 5-2420-231-23-2
0197
REMOVAL CONTINUED
3. Remove two bolts (Figure 2, Item 1) and washers (Figure 2, Item 2) from equalizer cover (Figure 2, Item 3).
4. Remove bolt (Figure 2, Item 5), washer (Figure 2, Item 4), and equalizer cover (Figure 2, Item 3) from machine.
Figure 2. Equalizer Cover.
0197
NOTE
Tag and mark wires to aid in installation.
5. Remove bolt (Figure 3, Item 3), lockwasher (Figure 3, Item 4) and disconnect cable (Figure 3, Item 5) from
NATO slave receptacle (Figure 3, Item 2). Discard lockwasher.
6. Remove bolt (Figure 3, Item 12), lockwasher (Figure 3, Item 11) and disconnect cable (Figure 3, Item 10) from
NATO slave receptacle (Figure 3, Item 2). Discard lockwasher.
NOTE
Note position and orientation of NATO slave receptacle to aid installation.
7. Remove four nuts (Figure 3, Item 13), lockwashers (Figure 3, Item 14), bolts (Figure 3, Item 6), tether
(Figure 3, Item 8), cap (Figure 3, Item 9), plate (Figure 3, Item 1), NATO slave receptacle (Figure 3, Item 2),
and gasket (Figure 3, Item 7) from machine. Discard lockwashers and gasket.