TM 5-2420-231-23-2
0197
INSTALLATION
0197
CAUTION
Install NATO slave receptacle as noted during removal. Failure to follow this caution may
result in damage to machine.
1. Install NATO slave receptacle (Figure 4, Item 2) with negative terminal marking (Figure 4, Item 1) towards front
of machine.
Figure 4. NATO Slave Receptacle Terminal Marking.
0197
2. Install new gasket (Figure 5, Item 7), NATO slave receptacle (Figure 5, Item 2), plate (Figure 5, Item 1), cap
(Figure 5, Item 9), tether (Figure 5, Item 8), four bolts (Figure 5, Item 6), new lockwashers (Figure 5, Item 14),
and nuts (Figure 5, Item 13) on machine.
NOTE
Install wires as tagged and marked during removal.
3. Connect cable (Figure 5, Item 10) and install new lockwasher (Figure 5, Item 11) and bolt (Figure 5, Item 12)
on NATO slave receptacle (Figure 5, Item 2).
4. Connect cable (Figure 5, Item 5) and install new lockwasher (Figure 3, Item 4) and bolt (Figure 5, Item 3) on
NATO slave receptacle (Figure 5, Item 2).
