TM 5-2420-231-23-2
0212
REMOVAL
0212
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
1. Remove locknut (Figure 1, Item 1) from transmission fluid temperature sensor (Figure 1, Item 4). Discard
locknut.
2. Disconnect wire (Figure 1, Item 2) from transmission fluid temperature sensor (Figure 1, Item 4).
3. Remove transmission fluid temperature sensor (Figure 1, Item 4) from fitting (Figure 1, Item 3).
Figure 1. Transmission Fluid Temperature Sensor.
0212
END OF TASK
CLEANING AND INSPECTION
0212
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions WP 0369.
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions WP 0370.
END OF TASK