TM 5-2420-231-23-2
0213
REMOVAL
0213
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark all wires to aid in installation.
1. Loosen clamp (Figure 1, Item 4) and disconnect coolant hose (Figure 1, Item 5) from water inlet housing
(Figure 1, Item 3).
2. Remove nut (Figure 1, Item 7) and lockwasher (Figure 1, Item 8) and disconnect wires (Figure 1, Item 6) from
alternator (Figure 1, Item 2). Discard lockwasher.
3. Disconnect wiring harness connector (Figure 1, Item 1) from alternator (Figure 1, Item 2).
Figure 1. Alternator.
0213
