TM 5-2420-231-23-2
0225
REMOVAL CONTINUED
NOTE
Note routing of hydraulic feed and return hoses to aid in installation.
5. Remove and discard tiedown strap (Figure 4, Item 1) from hydraulic feed hose (Figure 4, Item 2).
6. Loosen clamp (Figure 4, Item 3) from hydraulic feed hose (Figure 4, Item 2).
7. Disconnect hydraulic feed hose (Figure 4, Item 2) from reservoir (Figure 4, Item 4) and remove hydraulic feed
hose from machine.
8. Loosen clamp (Figure 4, Item 10) from hydraulic return hose (Figure 4, Item 9).
9. Disconnect hydraulic return hose (Figure 4, Item 9) from reservoir (Figure 4, Item 4) and remove hydraulic
return hose from machine.
10. Loosen four hose clamps (Figure 4, Item 7) from two hoses (Figure 4, Item 6).
11. Disconnect two hoses (Figure 4, Item 6) from reservoir (Figure 4, Item 4).
12. Remove reservoir (Figure 4, Item 4) from support bracket (Figure 4, Item 5).
13. Disconnect two hoses (Figure 4, Item 6) from reservoir tubes (Figure 4, Item 8).
Figure 4. Reservoir.
0225