TM 5-2420-231-23-2
0225
INSTALLATION CONTINUED
3. Connect two hoses (Figure 6, Item 6) to reservoir tubes (Figure 6, Item 8).
4. Install reservoir (Figure 6, Item 4) on support bracket (Figure 6, Item 5).
5. Connect two hoses (Figure 6, Item 6) to reservoir (Figure 6, Item 4).
6. Tighten four clamps (Figure 6, Item 7) on two hoses (Figure 6, Item 6).
7. Tighten reservoir tubes (Figure 6, Item 8).
NOTE
Install hydraulic feed and return hoses as noted.
8. Route hydraulic feed and return hoses on machine.
9. Connect hydraulic return hose (Figure 6, Item 9) to reservoir (Figure 6, Item 4).
10. Tighten clamp (Figure 6, Item 10) on hydraulic return hose (Figure 6, Item 9).
11. Connect hydraulic feed hose (Figure 6, Item 2) to reservoir (Figure 6, Item 4).
12. Tighten clamp (Figure 6, Item 3) on hydraulic feed hose (Figure 6, Item 2).
NOTE
Install tiedown straps in location and quantity noted during removal.
13. Install new tiedown strap (Figure 6, Item 1) on hydraulic feed hose (Figure 6, Item 2).
Figure 6. Reservoir.
0225
