TM 5-2420-231-23-2
0225
REMOVAL CONTINUED
14. Remove reservoir tube (Figure 5, Item 1) from master cylinder (Figure 5, Item 4).
15. Remove reservoir tube (Figure 5, Item 2) from master cylinder (Figure 5, Item 3).
Figure 5. Reservoir Tubes.
0225
END OF TASK
CLEANING AND INSPECTION
0225
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0225
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Remove plugs and caps from hoses and fittings.
1. Loosely install reservoir tube (Figure 5, Item 2) on master cylinder (Figure 5, Item 3).
2. Loosely install reservoir tube (Figure 5, Item 1) on master cylinder (Figure 5, Item 4).
