TM 5-2420-231-23-3
0235
INSTALLATION
0235
NOTE
Install lines as tagged and marked during removal.
Remove plugs and caps from hoses and fittings.
It will be necessary to rotate loader self-leveler control lever upward in order to route tubes
on machine.
1. With assistance, route two tubes (Figure 7, Items 1 and 6) on machine.
2. Connect tube (Figure 7, Item 6) to loader valve (Figure 7, Item 5).
3. Connect tube (Figure 7, Item 1) to loader valve (Figure 7, Item 2).
4. Connect tube (Figure 7, Item 7) to fitting (Figure 7, Item 8).
5. Tighten tube (Figure 7, Item 4) at loader valve (Figure 7, Item 3).
Figure 7. Loader Valve Connections.
0235
6. Connect hose (Figure 8, Item 10) to fitting (Figure 8, Item 9).
7. Install clevis (Figure 8, Item 5) and clevis pin (Figure 8, Item 6) on loader self leveler control lever
(Figure 8, Item 8).
8. Install new cotter pin (Figure 8, Item 7) on clevis pin (Figure 8, Item 6).
9. Install spacer (Figure 8, Item 12), bracket (Figure 8, Item 11), bolt (Figure 8, Item 2), flatwasher
(Figure 8, Item 13), new lockwasher (Figure 8, Item 14), and nut (Figure 8, Item 1) on two tubes
(Figure 8, Item 4).
NOTE
Install tiedown straps as noted during removal.