TM 5-2420-231-23-3
0246
CLEANING AND INSPECTION
0246
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0246
NOTE
Remove plugs and caps from hoses and fittings.
Route lines as noted during removal.
Install lines as tagged and marked during removal.
1. Position hose (Figure 2, Item 2) on machine.
2. Connect hose (Figure 2, Item 2) to cylinder rod end (Figure 2, Item 1).
3. Connect hose (Figure 2, Item 2) to tube (Figure 2, Item 3).
4. Position hose (Figure 3, Item 2) on machine.
5. Connect hose (Figure 3, Item 2) to cylinder base (Figure 3, Item 1).
6. Connect hose (Figure 3, Item 2) to tube (Figure 3, Item 3).
Figure 3. Cylinder Base Hose.
0246
7. Install cap on hydraulic tank (TM 5-2420-231-10).
END OF TASK
FOLLOW-ON TASKS
0246
Check hydraulic fluid and fill as necessary (TM 5-2420-231-10).
END OF TASK
END OF WORK PACKAGE
0246-3/(4 blank)