TM 5-2420-231-23-3
0247
CLEANING AND INSPECTION
0247
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0247
WARNING
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
NOTE
Remove plugs and caps from hoses and fittings.
Install lines as tagged and marked during removal.
1. Position tube (Figure 6, Item 4) on machine and connect hydraulic hose (Figure 6, Item 3) to hydraulic tube.
2. Position tube (Figure 6, Item 1) on machine and connect hydraulic hose (Figure 6, Item 2) to hydraulic tube.
3. Connect hydraulic hose (Figure 7, Item 4) to hydraulic tube (Figure 7, Item 1).
4. Connect hydraulic hose (Figure 7, Item 3) to hydraulic tube (Figure 7, Item 2).
Figure 7. Front Hose Connection.
0247