TM 5-2420-231-23-3
0245
CLEANING AND INSPECTION
000245
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
000245
WARNING
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
NOTE
Remove plugs and caps from hoses and fittings.
Install lines as tagged and marked during removal.
1. Position backhoe dipper cylinder tube (Figure 4, Item 5) on machine.
2. Connect backhoe dipper cylinder tube (Figure 4, Item 5) to hydraulic hose (Figure 4, Item 4).
3. Connect backhoe dipper cylinder tube (Figure 4, Item 5) to hydraulic hose (Figure 4, Item 6).
4. Position backhoe dipper cylinder tube (Figure 4, Item 2) on machine.
5. Connect backhoe dipper cylinder tube (Figure 4, Item 2) to hydraulic hose (Figure 4, Item 3).
6. Connect backhoe dipper cylinder tube (Figure 4, Item 2) to hydraulic hose (Figure 4, Item 1).
Figure 4. Backhoe Dipper Cylinder Tubes.
0245
